A.1) lowest root bridge id,2) lowest sender bridge id,3) lowest port id,4) lowest root path cost
B.1) lowest root path cost,2) lowest root bridge id,3) lowest sender bridge id,4) lowest sender port id
C.1) lowest root bridge id,2) lowest sender bridge id,3) lowest root path cost,4) lowest sender port id
D.1) lowest root bridge id,2) lowest root path cost,3) lowest sender bridge id,4) lowest sender port id
您可能感興趣的試卷
你可能感興趣的試題
A.VTP updates are ignored and forwarded out all ports.
B.VTP updates are ignored and forwarded out trunks only.
C.VTP updates are made to the VLAN database and are forwarded out trunks only.
D.VTP updates are ignored and are not forwarded.
A.8192
B.16384
C.49152
D.65535
A.Designated Root Cost
B.bridge ID priority
C.max age
D.bridge ID MAC address
E.Designated Root Priority
F.forward delay
A.one global STP instance for all VLANs
B.one STP instance for each VLAN
C.one STP instance per set of VLANs
D.one STP instance per set of bridges
A.Attempt to TELNET from the router connected to the inside of the firewall to the router connected to theoutside of the firewall. If telnet works, BGP will work, since telnet and BGP both use TCP to transportdata.
B.Ping from the router connected to the inside interface of the firewall to the router connected to theoutside interface of the firewall. If you can ping between them, BGP should work, since BGP uses IP totransport packets.
C.There is no way to make BGP work across a firewall without special configuration, so there is no simpletest that will show you if BGP will work or not, other than trying to start the peering session.
D.There is no way to make BGP work across a firewall.
最新試題
Based on the exhibit presented. What will be the objective of this route map when applied to traffic passing through a router?()
Which three message types are valid PIMv2 message types?()
Spanning Tree Protocol IEEE 802.1 s defines the ability to deploy which of these?()
Choose two commands that are required to enable multicast on a router, when it is known that thereceivers use a specific functionality of IGMPv3.()
Two routers configured to run BGP have been connected to a firewall, one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer, including the correctBGP session endpoint addresses and the correct BGP session hop-count limit EBGP multihop. What is agood first test to see if BGP will work across the firewall?()
When STP UplinkFast is enabled on a switch utilizing the default bridge priority, what will the new bridgepriority be changed to?()
Which command is used to enable SSM with the range 232.0.0.0 - 255.0.0.0?()
Which three protocols or applications should be placed in a class that is configured with WRED?()
Which multicast address is reserved for cisco-rp-discovery?()
Which two statements about SA caching are true?()