A.ICMP path echo
B.UDP echo
C.ICMP path jitter
D.Application Performance Monitor
E.TCP connect
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. You have noticed that several users in the network are consuming a great deal of bandwidth for the peer-to-peer application Kazaa2. You would like to limit this traffic， and at the same time provide a guaranteed 100 kb/s bandwidth for one of your servers. After applying the configuration in the exhibit， you notice no change in the bandwidth utilization on the serial link； it is still heavily oversubscribing the interface. What is the cause of this problem？（）
A.CEF needs to be enabled for NBAR
B.In class Kazaa2， you should configure a policer instead of a drop command.
C.The server class should have a priority of 100.
D.The bandwidth parameter on serial 0/0 is wrong.
E.Kazaa2 is not a valid protocol.
Refer to the exhibit. Users from the Engineering VLAN complain that every time Business VLAN users have a network connectivity issue，the Engineering VLAN users usually have problems experiencing slow response or network connectivity problems. After troubleshooting， anunauthorized switch 2 was found.This unauthorized switch has been a regular problem， assuming the root bridge function under thespanning-tree domain and causing the Engineering VLAN to be unstable. Which three of these actionscould be suggested to fix the problem？（）
A.Upgrade Spanning Tree Protocol to Rapid Spanning Tree Protocol.
B.Change Business VLAN PCs to switch 1 and switch 4.
C.Force the root bridge to be switch 2， instead.
D.Adjust spanning-tree timers （max-age and forward-delay）.
E.Shut down all unused ports.
F.Use MSTP to separate the Engineering VLAN from the Business VLAN to optimize spanning-tree convergence time within each VLAN.
Refer to the exhibit. As a network administrator， you have configured a dual-rate， dual-bucket policer in accordance with RFC 2698 on the serial interface of you router， connecting to your provider. The SLA with your provider states that you should only send AF31 （limited to 150 kb/s）， AF32 （limited to 50 kb/s）and AF33 （best effort）. Your service provider claims you are not conforming to the SLA.Which two things are wrong with this configuration？ （）
A.The configuration of a service policy on half-duplex Ethernet interfaces is not supported.
B.The class class-default sub-command of the policy-map limit command should be set to the DSCP default.
C.The violate action is wrong.
D.This policer configuration is not implementing RFC 2698 dual-bucket， dual-rate.
E.The policer is configured in the wrong class.
最新試題
什么是NAT？
four switches， which one will be root switch.（no pic）.
一堆交換機一個server、一個transpare，問配置prune在哪里配置？
Which of the following describes the roles of devices in a WAN?（）
什么問題導(dǎo)致SERVER VTP密碼跟替他交換機VTP密碼不匹配？
what is four ospf area type？
問一個怎么樣的屬性，能讓路由不通告給任何的peer？
QoS Mechanisms：問在部署QoS中要用的3個mechanisms是什么？
SPT初始狀態(tài)之后的一個狀態(tài)是什么？
What field in IP packet is used for classification by QOS？