您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. According to the output of the command show tag-switching forwarding-table, which four of these statements are true?()
A.Packets to the IP address 10.10.10.5/32 will be tagged with "17" toward the next hop.
B.Label "19" will be advertised to MPLS neighbors so that they can use this label to reach the IP address 10.10.10.6/32.
C.IP address 10.10.10.4/32 is directly connected to the neighbor router on serial 3/0.
D.Packets arriving with label "17" will be forwarded without any label toward serial 4/0.
E.Packets arriving with label "20" will be forwarded with label "21" after label-swapping.
F.Label "20" is advertised to MPLS neighbors so that they can use this information to reach the prefix 10.10.10.8/32.
給出一段配置問你使用的是什么技術?
簡要配置如下:
Class-map match-all image
Match protocol http www.cisco.com
Refer to the exhibit. There are two sites connected across WAN links. All intersite and intrasite links always have the same routing metric. The network administrator sees only the top routers and links being used by hosts at both LAN A and LAN B. What would be two suggestions to load-balance the traffic across both WAN links?()
A.Make HSRP track interfaces between the edge and core routers.
B.Replace HSRP with GLBP.
C.Add crossed intrasite links: R1-R4, R2-R3, R5-R8, and R6-R7.
D.Make R3 and R8 have lower HSRP priority than R1 and R7.
E.Replace HSRP with VRRP
A.ping 192.168.1.255
B.ping with sweep option
C.ping 192.168.1.127
D.ping 192.168.1.64
E.ping with broadcast option
最新試題
兩ebgp鄰居發路由過來 ,哪些屬性重置?
aaa架構中哪個是要求用戶輸入用戶名和密碼?
What is method list for configure aaa?
What is the three main step of using the QoS feature with MQC command line interface?
The Frame Relay network in the diagram is not functioning properly.What is the cause of the problem?()
A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?()
QoS Mechanisms:?jiǎn)栐诓渴餛oS中要用的3個mechanisms是什么?
Local Preference?
什么是NAT?
Refer to the exhibit.Which statement describes DLCI 17?()