A.Increase memory allocation for ACLs.
B.Remove all entries from the ACL and use a single permit ip any any statement.
C.Remove the log keyword from each ACL entry.
D.Reboot the device after the ACL has been applied.
您可能感興趣的試卷
你可能感興趣的試題
A.IPSec VPN
B.SSL VPN
C.port security
D.port security with statically configured MAC addresses
E.private VLANs
A.root guard
B.loop guard
C.BPDU guard
D.UDLD
E.BPDU skew detection
A.a routing protocol that is flooding updates
B.a flapping port that is generating BPDUs with the TCN bit set
C.STP is not running on the switch
D.a user that is downloading the output of the show-tech command
E.a corrupted switch CAM table
A.ip verify unicast source reachable-via any
B.ip verify unicast reverse-path
C.ip verify unicast reverse-path loose
D.ip verify unicast reverse-path strict
A.Increase the queue size of the voice class.
B.Guarantee bandwidth during congestion to the voice class with a bandwidth command.
C.Increase the tx-ring of the egress interface.
D.Implement LLQ for the voice class.
E.Decrease the rx-ring of the egress interface.
F.Decrease the queue size of the voice class.
最新試題
Which router is doing LSA type 7 to type 5 translation,and why?()
What are the "bound IP addresses" used for in LDP?()
What does the OSPF command capability vrf-lite achieve?()
When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured, which parameter determines the winner?()
In GLBP, which router will answer on client ARP requests?()
For the following items,what is the mathematical relationship between the committed information rate (CIR), committed burst (Bc), and committed rate measurement interval (Tc)?()
Which IOS security feature is configured by the ip inspect inspection-name {in out} command?()
Which three protocols should be explicitly managed by using Control Plane Policing on an Internet border router?()
What is the command to configure RSVP to reserve up to one-tenth of a Gigabit link, but only allow each individual flow to use 1 MB/s?()
Two directly connected routers, R1 and R2, are both configured for OSPF graceful restart. R2 is able to switch packets in hardware, but R1 is not. If a network administrator logs on to R2 and performs a system reload, which will be the result?()