A. In the blade BIOS
B. In the operating system
C. In the service profile
D. In the card option ROM
您可能感興趣的試卷
你可能感興趣的試題
A. The QoS policy assigns a system class to the outgoing traffic for a vNIC or vHBA.
B. Flow-control policies determine whether the uplink Ethernet ports in a Cisco UCS environment send and receive IEEE 802.3x pause frames when the send buffer for a port fills.
C. If no system class is configured as CoS 0， the Fibre Channel system class is used.
D. The user can configure QoS for these system classes： platinum， gold， silver， best effort， Fibre Channel.
E. When configuring a system class， the type of adapter in a server may limit the maximum MTU supported.
A. boot policy and BIOS policy
B. disk scrub and boot policy
C. BIOS setting scrub， boot policy， and BIOS policy
D. disk scrub and BIOS setting scrub
A. name
B. best-effort
C. burst
D. rate
E. host control
A. logical configuration
B. all configuration
C. full state
D. system configuration
A. If disk scrub is enabled， all BIOS settings for the server are erased.
B. If disk scrub is enabled， all the data access on any local drives is destroyed.
C. If disk scrub is enabled， the LSI active RAID is destroyed but data is still preserved.
D. If disk scrub is disabled， all data on any local drives is preserved， including the local storage configuration.
E. If disk scrub is enabled， all data on any local drives is preserved， including the local storage configuration.
最新試題
In the event of a GSS failure in a GSS cluster， which is true？（）
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）
Application Control Engine （ACE） can check the health of servers and server farms by configuring health probes （which are sometimes referred to as keepalives）. A probe can be one of many types. Which are valid ACE probes？ （）
Which is true when describing a connection replication in Cisco ACE？（）
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager？（）
Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager？ （）
In a Cisco Unified Computing System， What is the "designated receiver" port in end-host mode used for？（）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
What is the purpose of this command in a Cisco Application Control Engine？（） switch/Admin# show np 1 me-stats "-F0 v"
Which statement is true about "full state backup" in a Cisco Unified Computing System？（）