Refer to the exhibit.
What problem is preventing users on VLAN 100 from pinging addresses on VLAN 200？（）
A.No default route on DLS1.
B.Encapsulation mismatch between switches.
C.Native VLAN mismatch.
D.Subinterfaces should be created on Fa0/7 and Fa0/8 on DLS1.
E.Trunking needs to be enabled.
F.The ip routing command is missing on DLS1.
您可能感興趣的試卷
你可能感興趣的試題
Cisco Express Forwarding has been enabled on router TK1.
With CEF， prefixes that require exception processing can be cached with one of which four special adjacencies？ （）
A.Kick
B.Drop
C.Forward
D.Null
E.Discard
F.Glean
G.Express
Your boss， Miss ，is interested in CEF.
What should you tell her？ （）
A.The FIB lookup is based on the Layer 3 destination address prefix （shortest match）.
B.The adjacent table is derived from the ARP table.
C.The FIB table is derived from the IP routing table.
D.When the adjacency table is full， a CEF TCAM table entry points to the Layer 3 engine to redirect the adjacency.
E.CEF IP destination prefixes are stored in the TCAM table， from the least specific to the most specific entry.
F.When the CEF TCAM table is full， packets are dropped.
Refer to the exhibit. DHCP snooping is enabled for selected VLANs to provide security on the network.
How do the switch ports handle the DHCP messages？（）
A.Ports Fa2/1 and Fa2/2 source DHCP requests only. Port Fa3/1 is eligible to source all DHCP messages and respond to DHCP requests.
B.Ports Fa2/1 and Fa2/2 respond to DHCP requests only. Port Fa3/1 is eligible to source all DHCP messages.
C.Ports Fa2/1 and Fa2/2 are eligible to source all DHCP messages and respond to DHCP requests. Port Fa3/1 can source DHCP request only.
D.All three ports， Fa2/1， Fa2/2， and Fa3/1， are eligible to source all DHCP messages and respond to DHCP requests.
Exhibit：
You work as a network administrator at. You study the exhibit carefully.
Which configuration on the HSRP neighboring device ensures that it becomes the active HSRP device in the event that port fa1/1 on 1 goes down？ （）
A. 2（config-if）#ip address 10.10.10.2 255.255.255.0 2（config-if）#standby 1 priority 200 2（config-if）#standby 1 ip 10.10.10.10
B. 2（config-if）# ip address 10.10.10.2 255.255.255.0 2（config-if）#standby 1 priority 195 2（config-if）#standby 1 preempt 2（config-if）#standby 1 ip 10.10.10.10
C. 2（config-if）# ip address 10.10.10.2 255.255.255.0 2（config-if）#standby 1 priority 190 2（config-if）#standby 1 ip 10.10.10.10 2（config-if）#standby 1 track interface fa 1/1
D. 2（config-if）# ip address 10.10.10.2 255.255.255.0 2（config-if）#standby 1 priority 200 2（config-if）#standby 1 preempt 2（config-if）#standby 1 ip 10.10.10.10 2（config-if）#standby 1 track interface fa 1/1
You have configured the "config network webmode enable" command on a Cisco device.
What is the purpose of this command？ （）
A.To allow HTTP access to the WLAN controller
B.To allow SSH access to the CLI of the WLAN controller
C.To allow SSL access to the CLI of the WLAN controller
D.To allow HTTPS access to the WLAN controller
E.None of the other alternatives apply
最新試題
Refer to the exhibit. What does the command channel-group 1 mode desirable do？ （）
Refer to the exhibit. Based on the output of the show spanning-tree command， which statement is true？ （）
Refer to the exhibit. Which statement is true about the output？（）
Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result？（）
Refer to the exhibit. STP has been implemented in the network. Switch SW_A is the root switch for the default VLAN. To reduce the broadcast domain， the network administrator decides to split users on the network into VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 root primary on switch SW_A. What will happen as a result of this change？（）
During routine maintenance， it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time， DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ？ （）
Refer to the exhibit. Initially， LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements are true about the possible result of attaching the second link？（）
DS2 has not become the active device for Vlan103’s HSRP group even though all interfaces are active. As related to Vlan103’s HSRP group. What can be done to make the group function properly ？ （）
Examine the diagram. A network administrator has recently installed the above switched network using 3550s and would like to control the selection of the root bridge.Which switch should theadministrator configure as the root bridge and which configuration command must theadministrator enter to accomplish this？（）
What is the configured priority value of the Vlan105’s group on DS2 ？（）