單項選擇題What is the purpose of the WLC Controller->Multicast->IGMP Timeout feature operating on v5.2?()

A.to determine if there are more clients that are using the multicast stream
B.to limit the time that a client has to request an IGMP join to the controller multicast group
C.to determine if the multicast router is still alive and responding to multicast clients
D.to remove clients from the multicast group if the multicast traffic exceeds the allotted bandwidth allowed  for multicast clients


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題Which statement is correct for the LWAPP/CAPWAP AP upstream encapsulated frame for a WMM-associated client frame that is centrally switched running v5.2?()

A.Wireless client WMM UP classification is translated to a wired DSCP priority.
B.Wireless client 802.11p classification is translated to a wired DSCP priority.
C.Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
D.Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.

3.多項選擇題What are two design considerations for a WLAN to support voice?()

A.Packet loss is less than one percent.
B.Signal strength at cell edge is approximately -67 dBm.
C.End-to-end delay is less than 200 ms.
D.Cell overlap between APs is 50 percent.

4.多項選擇題Which three call information items does AirMagnet VoFi Analyzer provide?()

A.the codec used by the calling phone
B.approximate length of the call in minutes
C.MOS values throughout the duration of the call
D.802.11e access category overruns
E.co-channel interference percentage during the call

5.單項選擇題Which statement correctly describes a wireless client Layer 2 roam from AP1 to AP2 while joined to a multicast stream using Cisco WLC running v5.2?()

A.Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC after AP1 issues an IGMP query.
B.Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC independent of AP1 multicast member status.
C.Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  provided that another client has  already joined that multicast.
D.Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  regardless if any other clients have  already joined that multicast.

最新試題

Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?()

題型:單項選擇題

What will improve the battery life of a Cisco Unified Wireless IP Phone 7921G?()

題型:單項選擇題

Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?()

題型:多項選擇題

Which three solutions does AirMagnet VoFi Pro Analyzer integrate?()

題型:多項選擇題

What is the WMM user priority of the packets going downstream to the client when the client does not support TSPEC but the Cisco WLC has ACM enabled and WLAN priority is set to Platinum?()

題型:單項選擇題

Which three are interframe spaces defined in 802.11?()

題型:多項選擇題

Which configuration is required for a Vocera badge to function properly on a Cisco WLC?()

題型:單項選擇題

How do Cisco Unified Communications IP phones receive firmware upgrades?()

題型:單項選擇題

For which WMM queue is U-APSD most beneficial?()

題型:單項選擇題

What is the Cisco recommended setting for the Cisco Unified Wireless Network WLC Voice Call Admission Control Max RF Bandwidth to support the Cisco Unified Wireless IP Phone 7921G?()

題型:單項選擇題