A.5 to 10 percent for both 2.4 GHz and 5 GHz
B.10 percent for both 2.4 GHz and 5 GHz
C.20 percent for 2.4 GHz and 15 to 20 percent for 5 GHz
D.20 percent for 2.5 GHz and 10 percent for 5 GHz
您可能感興趣的試卷
你可能感興趣的試題
A.1， 4， 7， 11
B.1， 4， 8. 11
C.1， 6， 11， 1
D.2， 4， 6， 8
A.AP1130
B.AP1242
C.AP1252
D.BR1310
A.Cisco WCS supports third-party antennas for location applications.
B.Access points that are defined with third-party antennas will not participate in rogue on-demand location tracking.
C.Cisco WCS supports third-party antenna gain， azimuth， and elevation progation patterns.
D.Access points that are defined with a third-party antenna in Cisco WCS will display coverage heat maps.
A.Max RF bandwidth is 75 percent， reserved roaming bandwidth is 6 percent.
B.Max RF bandwidth is 50 percent， reserved roaming bandwidth is 10 percent.
C.Max RF bandwidth is 50 percent， reserved roaming bandwidth is 15 percent.
D.Max RF bandwidth is 0 percent， reserved roaming bandwidth is 0.
A.NEMA area
B.plenum area
C.DAS area
D.extended area
E.RF special area
最新試題
The Cisco Aironet 1140 Series Access Point draws 12.95 W at the power source. However， whenusing a long Ethernet cable， the device can draw up to how much additional wattage？（）
What should be done if Cisco Spectrum Expert Wi-Fi reports a channel utilization of 40 percent onchannel 36， from a source outside of the site？（）
By how much is a signal’s strength reduced when the signal passes through an object thatintroduces 3 dB of attenuation？（）
How is attenuation measured？（）
What is a site survey best practice for location-based services？（）
Which antenna generally has the narrowest first Fresnel zone in both the horizontal and verticalplanes？（）
A design requires 100 access points with high channel bandwidth and disabled lower data rates.How are the data rates set on the Cisco WLC and Cisco WCS？（）
Which three device types are identified by Cisco Spectrum Expert Wi-Fi finding an Avg PulseDuration parameter？（）
Which three formats can be used to import floor maps in Cisco WCS v5.2？（）
For an active Cisco Unified Wireless IP Phone 7921G 5 GHz site survey， what are the mostappropriate client test settings to use with the AirMagnet site survey tool？（）