A.Fresnel zone
B.SNR
C.SLR
D.PoE
E.EIRP
您可能感興趣的試卷
你可能感興趣的試題
A.7
B.14
C.20
D.30
A.data/coverage
B.voice
C.location
D.mesh
E.public
F.WPAN
A.13 dBm
B.19 dBm
C.25 dBm
D.31 dBm
A.photographs
B.floor plans
C.wired network layout
D.blueprints
A.0.25 W
B.0.45 W
C.1 W
D.1.25 W
E.2.45 W
F.5.65 W
最新試題
A design requires 100 access points with high channel bandwidth and disabled lower data rates.How are the data rates set on the Cisco WLC and Cisco WCS？（）
What is the minimum recommended access point overlap for voice roaming？（）
Which three device types are identified by Cisco Spectrum Expert Wi-Fi finding an Avg PulseDuration parameter？（）
What should be done if Cisco Spectrum Expert Wi-Fi reports a channel utilization of 40 percent onchannel 36， from a source outside of the site？（）
For an active Cisco Unified Wireless IP Phone 7921G 5 GHz site survey， what are the mostappropriate client test settings to use with the AirMagnet site survey tool？（）
Which three items does the Cisco WCS Planning Tool Generate Proposal Report provide？（）
When using a lightning arrestor， connect which type of ground wire to a good earth ground？（）
Which three formats can be used to import floor maps in Cisco WCS v5.2？（）
The Cisco Aironet 1140 Series Access Point draws 12.95 W at the power source. However， whenusing a long Ethernet cable， the device can draw up to how much additional wattage？（）
Cisco recommends a decibel referenced to 1 milliwatt signal level for the coverage cell edge at thepredetermined data rate that is needed to support the VoWLAN device and call capacityrequirements. What is that signal level value for Cisco Unified Wireless IP Phones 7920， 7921G， and7925G？（）