Vlans have been enabled on an autonomous access point. in order for clients associating to vlans other than the native vlan to receive an ip address.
Which of the following must be configured？（）
A.access point ethernet port set to ssl trunking
B.switchport set to 802.1q trunking
C.switchport set to ssl trunking
D.access point ethernet port not set to 802.1q trunking
您可能感興趣的試卷
你可能感興趣的試題
A.controller name
B.outdoor area
C.floor area
D.networks
E.mac address
F.ip address
A.router （config）# wlccp authentication-server infrastructure eap group_1
B.router （config）# wlccp authentication-server infrastructure eap-fast group_1
C.router （config）# wlccp authentication-server client eap-fast group_1
D.router （config）# wlccp authentication-server client eap group_1
A.registration error
B.authentication failures threshold
C.http disabled
D.telnet disabled
A.administrators
B.system monitoring
C.network operator
D.power users
E.admin
F.users’ assistant
When configuring vlans on an autonomous access point.
What must be configured on the connected switchport？（）
A.802.1q trunking
B.vtp trunking
C.isl trunking
D.dpt trunking
最新試題
You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped.What may cause this problem？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
Which of the following accurately represents the functionality of a lightweight access point configured to operate in sniffer AP mode？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）
An REAP was supporting 16 WLANs， but now it only supports one.What happened to cause the change？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）