A.Configure weight
B.Enable route reflector
C.Create a distribute list
D.Enable the Longer Autonomous System path option
E.All of the above
您可能感興趣的試卷
你可能感興趣的試題
A.Router (config-router)#network 154.2.1.0
B.outer (config-router)#network 164.2.1.0
C.Router (config-router)#network-advertise 154.2.1.0
D.Router (config-router)#network 154.2.1.0 mask 255.255.255.0
E.None of the other alternatives apply
The BGP routing table consists of the following network routes:
What is the correct command to summarize these prefixes into a single summary prefix of192.168.12.0/22 while also allowing for the advertisement of the more specific prefixes?()
A.network 192.168.12.0 mask 255.255.252.0
B.network 192.168.12.0 mask 0.0.3.255
C.network 192.168.12.0
D.aggregate-address 192.168.12.0 255.255.252.0
E.aggregate-address 192.168.12.0 255.255.252.0 summary-only
F.aggregate-address 192.168.12.0 255.255.252.0 as-set
A.A peer router running IBGP
B.A peer router running EBGP
C.A community member running IBGP
D.A peer group member running IBGP
E.A peer group member running EBGP
A BGP router is configured as shown below:
interface ethernet 0
ip address 10.10.10.1 255.255.0.0!
int serial 0
ip address 172.16.1.1 255.255.255.252!
router bgp 65001
neighbor 192.168.1.1 remote-as 65002
Based on the above configuration, which of the following BGP statements would inject the10.10.0.0/16 prefix into the BGP routing table?()
A.network 10.0.0.0
B.network 10.10.0.0 mask 255.255.0.0
C.network 10.10.10.1 mask 255.255.255.255
D.network 10.10.10.0 mask 255.255.255.0
E.network 10.0.0.0 mask 255.255.0.0
A.The IBGP routers must always be fully meshed
B.The IBGP routers can be in a different AS
C.The IBGP routers must be directly connected
D.The IBGP routers do not need to be directly connected
E.None of the other alternatives apply are true
最新試題
cisco ios command to interface dialer 0
Identify the recommended steps for worm attack mitigation by dragging and dropping them into thetarget area in the correct order.
Match the xDSL type on the above to the most appropriate implementation on the below.
A new router was configured with the following commands:The configuration above was found on an Internet Service Provider’s (ISP) Multiprotocol LabelSwitching (MPLS) network. What is its purpose?()
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed?()
Drag and drop the xDSL type on the above to the appropriate xDSL description on the below.
Which statement about PPPoA configuration is correct?()
Study the exhibit carefully. The Cisco IOS IPsec High Availability (IPsec HA) Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is, Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec?()
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible.To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.Which defined peer IP address an local subnet belong to Crete?()
Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.