A.show {802.11a 802.11b} 2roam statistics
B.show client roam-history
C.show client tsm 802.11a/b/g
D.show client detail
E.show client ap-roam-history
您可能感興趣的試卷
你可能感興趣的試題
A.average signal strength that is greater than -67 dBi
B.cell overlap of 15 to 20 percent
C.uneven wireless coverage
D.absence of coverage holes
A.more access points than a data network
B.fewer access points than a data network
C.less SNR than a data network
D.specific relative access point placement
A.omnidirectional
B.patch
C.Yagi
D.sector
E.parabolic dish
A.Alternate polarization between colocated antennas
B.Cross-polarize antennas between endpoints
C.Install an RF-shielded box around the antennas
D.Increase the distance between the antennas
A.-65 dBm
B.-67 dBm
C.-69 dBm
D.-70 dBm
最新試題
What should be done if Cisco Spectrum Expert Wi-Fi reports a channel utilization of 40 percent onchannel 36， from a source outside of the site？（）
By how much is a signal’s strength reduced when the signal passes through an object thatintroduces 3 dB of attenuation？（）
When planning for VoWLAN capacity during a site survey， how many simultaneous calls can beestimated per 5 GHz channel？（）
A design requires 100 access points with high channel bandwidth and disabled lower data rates.How are the data rates set on the Cisco WLC and Cisco WCS？（）
Which antenna generally has the narrowest first Fresnel zone in both the horizontal and verticalplanes？（）
Which three device types are identified by Cisco Spectrum Expert Wi-Fi finding an Avg PulseDuration parameter？（）
When surveying for VoWLAN， which power level should you base the access point coverage designon？（）
What will cause wireless voice devices to perform poorly？（）
How is attenuation measured？（）
Which can NOT be selected for supported services in Cisco WCS Planning Tool？（）